operation video of CB150-Y flexo proofer

Inkometer

http://www.alibaba.com/product-detail/Caibang-Inkometer-together-used-with-ink_2006683110.html

Caibang CB-50TX Inkometer

Digital ink viscosity meter mainly adopts the modern intelligent industrial control configuration: highest PLC + + servo motor, touch screen clearly, accurately show the instantaneous TongGun revolutions, tank temperature, automatic adjustment, under the test conditions of requirements (servo motor can guarantee speed up to 1), guarantee the stability of the test condition under any circumstances, to ensure the repeatability and accuracy of the detection of ink viscosity value.Instrument and configure the humanized design, can set up automatic measurement and manual measurement, the entire process without manual testing roller and distributing roller clutch pressure, instrument automatically.Instruments and sensors and no-load correction easy, adjustable viscosity value correction instrument with other brands worth to adhesive.Instruments can be extended to an external PC to read the data function (optional)

      The main technical parameters:
TongGun spindle revolutions: file I - 400 r/min;II gear - 800 r/min;III - 1200 r/min
IV file - 1600 r/min;V profile: 2000 revolutions per minute
Set speed (100-2000) and revolutions per minute
The power supply voltage: 220 v, 50 hz
Total: 1600 watts (800 watts of motor, water tank 800 watts)
Pump flow: 10 litres per minute (constant temperature water tank capacity: 6 liters)
Spindle Tong Gun after the workbench leveling level error is 0.03 mm
The standard single thermal constant temperature water tank temperature error is 0.2 ℃
Cold hot amphibious model plus or minus 0.1 ℃ (optional)
Display shows accuracy: 0.1 ink viscosity units
Under the condition of same test repetition measurement unit of error of plus or minus 0.3 ink viscosity
Print: test time, number, temperature, speed, viscosity values
The standard easy to tear open outfit, easy to clean filling ink, a
Instrument installation dimensions: 750 x300x480mm
Instruments: the total weight 130 kg
Noise: less than 50 db

offset ink mixer

plan for establishment of printing ink color matching center

1.A color matching room
2.five 220v power supply sockets
3.5 lab tables (solid wooden tables of 1.2x0.6m)
4.5 pieces of table glass
5.one computer (win7/xp,wide screen display ,disply resolutionof 900x1400,memory of 1G or above and one printer
6.one electrical banlance with a precision of 0.001kg
7.spectrodens
8.color matching software
9.automatic printing proofer
10.ink mixer
11.ink quatifier
12.uv curing machine
13.one cutting knife for office use
14.standard light sources

offset ink proofer

what is ink proofer and its functions

offset printing ink proofer

A proof is one (or a few) copies that show how a print job will look. Proofs originated in commercial printing, where the lithographic, gravure, or flexographic presses take a lot of work to set up. The idea was to print a fast, economical single copy of a job to show the customer, before spending the time and materials to make printing plates, ink up the press, and adjust ink and water balance-only to find that the customer didn't like the color.

As low-cost color printers were developed, designers and photographers also began making their own proofs. Today, proofs can be divided into two types, depending upon how they're used:

• Contract proofs show the appearance of color, or how photos will look when printed. The customer may be asked to sign off on the proof, indicating his or her acceptance of the job, hence the term "contract proof." Contract proofs need to be highly accurate in color.
• Preproofs, design proofs, or "comps" show early design stages of a job. Depending upon the stage at which they're made, preproofs may or may not need accurate color. Preliminary comps are economical prints mostly for internal use, usually from a desktop laser or inkjet printer, that show early design stages of a job, such as layout, position, and general color appearance. This type of preproof may not need accurate color. Final comps, used to present finalized designs to customers, may need to provide higher quality and more accurate color matching.

Quick History of Proofing
The first proofs were made on special "proof presses" that were separate from the production press and a little easier to set up. In the 1970s press proofs were replaced by laminated photographic systems like DuPont Cromalin and 3M Matchprint. In the early '90s continuous-flow inkjet proofs like IRIS and DuPont Digital Cromalin began to replace analog proofs. Customers who wanted halftone dots and press-like color began using digital dot proofs like the Kodak Approval and Creo Spectrum. In the late 1990s, large-format inkjet proofers, which had been considered too low in quality to use as contract proofs, made major quality advances and, with color management, have made large-format inkjet proofs the most common type of contract proof today.

FUNCTION

1. Spot color proofing

The multi-segment color mixing simulation machine can print color bars of different colors or the same ink color bar of different ink layer thickness at the same time, and can also print new and old ink on the same material for comparison, providing high-efficiency color comparison.

2. Four-color ink testing

It can test color hue, gloss and color concentration of ink, helping to control the quality of printed products basing on control of raw material quality.

3. Sample printing for pre-printing review by customers

It can print simple color bar for pre-printing review or filing by customers.

4. Testing color change of dry and wet ink

It can show required spot color ink color bar, and forecast the color hue after drying of the spot color (for example, purple and dark blue may turn reddish after drying, and this can be solved before printing).

5. When used together with a quantifier, it can forecast the consumption quantity of spot color ink, helping to greatly reduce residual ink waste and stock. It can also forecast ink transfer quantity and ink layer thickness.

6. Data-based management

When used together with spectral density meter, it can provide a data report on the color bar measured (Lab value).

7. When used together with other related instruments, it can forecast wear resistance, drying time, light resistance, heat resistance and other features of ink. 

modern flow of color matching system

inkometer

the inkometer's water tank is cooling one or heating one or both

Flexo automatic ink proofer CB100-Y operation video

http://youtu.be/MsSDIdwlX4k

Flexo ink proofer CB100-Y operation video

CB100-Y automatic flexo ink proofer for packaging&printing ,printing inks

7,805.00---8,599.00 usd
http://nuobang.en.alibaba.com

the advantages are as followed:

1. It uses  flexo ceramic screen roller and scraper for ink supply.

2. It uses flexo structure, close to the structure of flexo printing machine.

3. Its proofing speed is close to the printing speed of flexo printer.

4. It has higher repeatability than silk roller.

5. Its printing effect is comparable to flexo printing machine. 

6. Convenient operation, automatic positioning, and electrical pressure application.

7. Easy cleaning of water type flexo printing ink.

8. The thread number of ceramic screen roller can be customized and easily changed.

automatic offset ink proofer &offset ink mixer

http://nuobang.en.alibaba.com

Have a nice weekend!

Nuobang Color matching software can be Compatable with X-rite

Nuobang Peiseda Color matching software which is able to be compatable with X-Rite sp62,sp64,exact standard,exact advanced,i1,530,Spectroeye

auto flexo in proofer

www.zsnuobang.com 

Model No.	CB100-Y
Application	Single-color proofing (e.g. color matching and testing)
Power Supply	220V, 50/60Hz
Power	200W
Inking Method	Ink dropping with burette
Applicable Ink	Flexographic water ink, UV ink, lithography ink, relief printing ink
Thickness of Proofing Material	0.01-2mm (Flexible material)
Size of Proofing Material	220*260MM
Applicable Proofing Material	Paper, plastic film, non-woven fabrics, napkin, gold/silver card paper, etc.
Pressure of Printing Plate Roller and Ceramic Roller	Fine adjustment allowable: Adjustment range 1MM
Pressure of Printing Plate Roller and Press Drum	Fine adjustment allowable: Adjustment range 2MM
Printing Speed	Adjustable, 0-40m/min
Printing Area	165*165MM
Area of Printing Plate	165*190MM
Thickness of Printing Plate	1.7MM flexible plate
Specs of Ceramic Screen Roller	φ70*185MM
Thread Number of Ceramic Screen Roller	400, 500 and 600, with a standard roller supplied (300-1,000 available for customization)
Dimension (L*W*H)	530*425*340MM
Net Weight	76KG

Spot color matching is a key part of color management in printing industry, and there is big defects in the traditional color matching methods:

1. Time waste

If traditional spot color matching methods are used: Many companies have at least 50 spot colors each month, and some single printing machines have a work load of 110 spot colors each month. We assume 80 pot colors are matched each month, and 40 minutes of shutdown and matching is required for each spot color, then we have to spend 38,400 minutes in matching spot color ink, equal to 27 days. We assume RMB 10,000 of printing income can be earned each day (24 hours), then the loss in one exceeds RMB 270,000.

2. Serious ink waste

In spot color matching mechanism, preparation of excess ink instead of insufficient ink is allowed, and workers often prepare excess ink basing on their experience. If the excess ink is not used timely, there may be many solidified ink dregs as there are many air bubbles in the ink due to no process of air discharging, leading to serious quality defect in the printed products. Therefore, many companies discard the residual spot color ink after a relatively short period, and this causes serious economic loss and environmental pollution.  

3. Easy occurrence of quality problems

As the traditional color matching mechanism requires manual color matching by workers, their experience becomes quality standards. This may easily cause quality accidents such as excess color hue difference, serious metamerism, serious color change after drying, and even loss in subsequent processes. These quality problems are also key reasons for product returning by customers, and may lead to disastrous losses.

How to improve the traditional spot color matching methods with rapid, accurate and low-consumption new methods? To solve this process defects, we must optimize the spot color ink preparation process. Thus, we developed standardized and data-based Nuobang Peiseda color matching software.

Zhongshan Nuobang Color Equipment Co., Ltd., after many years of research, has developed an accurate, aimed and easily operable color matching system basing on internationally accepted color expression, the color features of domestic printing ink, the color matching functions of color spectrum data, and the like. 

ink proofer----------autamatic flexo ink proofing machine

Model No.	CB100-Y
Application	Single-color proofing (e.g. color matching and testing)
Power Supply	220V, 50/60Hz
Power	200W
Inking Method	Ink dropping with burette
Applicable Ink	Flexographic water ink, UV ink, lithography ink, relief printing ink
Thickness of Proofing Material	0.01-2mm (Flexible material)
Size of Proofing Material	220*260MM
Applicable Proofing Material	Paper, plastic film, non-woven fabrics, napkin, gold/silver card paper, etc.
Pressure of Printing Plate Roller and Ceramic Roller	Fine adjustment allowable: Adjustment range 1MM
Pressure of Printing Plate Roller and Press Drum	Fine adjustment allowable: Adjustment range 2MM
Printing Speed	Adjustable, 0-40m/min
Printing Area	165*165MM
Area of Printing Plate	165*190MM
Thickness of Printing Plate	1.7MM flexible plate
Specs of Ceramic Screen Roller	φ70*185MM
Thread Number of Ceramic Screen Roller	400, 500 and 600, with a standard roller supplied (300-1,000 available for customization)
Dimension (L*W*H)	530*425*340MM
Net Weight	76KG

Flexible Packaging in Excellence, Hatzopoulos S.A.

we are a
leading manufacture of ink proofer in China .we are a supplier of dic
,siewgerk,toyo etc.Kindly email me or forward it to your chief technical
officer in order that he  can know the details.you know,ink proofer is
often used by technical person

my email:13425519257@126.com

skype:jihongbin3

www.zsnuobang.com

Flexible Packaging: Packets, Sachets, Pouches, Wrappers, Stick Packs

we are a
leading manufacture of ink proofer in China .we are a supplier of dic
,siewgerk,toyo etc.Kindly forward it to your chief technical officer in order that he  know the
detals.

my email:13425519257@126.com

skype:jihongbin3

www.zsnuobang.com

Temkin International - Flexible Packaging Manufacturing

we are a
leading manufacture of ink proofer in China .we are a supplier of dic
,siewgerk,toyo etc. feel free to contact me if you mean to  know the
detals.

my email:13425519257@126.com

skype:jihongbin3

www.zsnuobang.com

Divinol by CLK Interpromet

we are a
leading manufacture of ink proofer in China .we are a supplier of dic
,siewgerk,toyo etc. feel free to contact me if you mean to  know the
detals.

my email:13425519257@126.com

skype:jihongbin3

www.zsnuobang.com

THE SAKATA INX GROUP - GLOBAL CAPABILITES - LOCAL SOLUTIONS

we are a leading manufacture of ink proofer in
China .we are a supplier of dic ,siewgerk,toyo etc. feel free to contact me if
you mean to  know the detals.

my
email:13425519257@126.com

skype:jihongbin3

AKYÜZ MATBAA MALZEMELERİ HUBER MÜREKKEP HUBER INKS

we are a leading manufacture of ink proofer in China .we are a supplier
of dic ,siewgerk,toyo etc. feel free to contact me if you mean to  know
the detals.


my
email:13425519257@126.com

skype:jihongbin3

we are a leading manufacture of ink proofer in China .we are a supplier of dic ,siewgerk,toyo etc. feel free to contact me if you mean to know the detals. my email:13425519257@126.com skype:jihongbin3

we are a leading manufacture of ink proofer in China .we are a supplier
of dic ,siewgerk,toyo etc. feel free to contact me if you mean to  know
the detals.


my
email:13425519257@126.com

skype:jihongbin3

The Flint Group | Aim High

we are a leading manufacture of ink proofer in China .we are a supplier of dic ,siewgerk,toyo etc. feel free to contact me if you mean to  know the detals.

my email:13425519257@126.com
skype:jihongbin3

Interview Niklas Olsson, Flint Group Narrow Web

we are a leading manufacture of ink proofer in China .we are a supplier of dic ,siewgerk,toyo etc. feel free to contact me if you mean to  know the detals.

my email:13425519257@126.com
skype:jihongbin3

The Performance Edge. Flint Ink Group

we are a leading manufacture of ink proofer in China .we are a supplier of dic ,siewgerk,toyo etc. feel free to contact me if you mean to  know the detals.

my email:13425519257@126.com
skype:jihongbin3

Niklas Olsson (Flint Ink, Marketing Committee)

we are a leading manufacture of ink proofer in China .we are a supplier of dic ,siewgerk,toyo etc. feel free to contact me if you mean to  know the detals.

my email:13425519257@126.com
skype:jihongbin3

SunChemical - The World's largest supplier of inks and pigments

Sun Chemical

White Tile Plant - SunPak Printing Ink Motherplant (Frankfurt, DE)

White Tile Plant - SunPak Printing Ink Motherplant (Frankfurt, DE)

Flexographic Sticker Printing At Clubcard | Clubcard TV

Sheet Fed Offset Ink Manufacturer| Web Fed Offset Ink | Inks for Printin...

Function of ink proofer

flexo ink proofer

1.       Spot color proofing

The multi-segment color mixing simulation machine can print color bars of different colors or the same ink color bar of different ink layer thickness at the same time, and can also print new and old ink on the same material for comparison, providing high-efficiency color comparison.

2. Four-color ink testing

It can test color hue, gloss and color concentration of ink, helping to control the quality of printed products basing on control of raw material quality.

3. Sample printing for pre-printing review by customers

It can print simple color bar for pre-printing review or filing by customers.

4. Testing color change of dry and wet ink

It can show required spot color ink color bar, and forecast the color hue after drying of the spot color (for example, purple and dark blue may turn reddish after drying, and this can be solved before printing).

5. When used together with a quantifier, it can forecast the consumption quantity of spot color ink, helping to greatly reduce residual ink waste and stock. It can also forecast ink transfer quantity and ink layer thickness.

6. Data-based management

When used together with spectral density meter, it can provide a data report on the color bar measured (Lab value).

7. When used together with other related instruments, it can forecast wear resistance, drying time, light resistance, heat resistance and other features of ink.

website :www.zsnuobang.com 

Skype:jihongbin3

Maintenance of Printability Tester

                        www.zsnuobang.com
                         skype:jihongbin3
Don't talk big .everything takes maintenance.
1.Ink Roller
   Clean it out after being used.
2.Rubber blanker
    Unloade it after about a month of working
   
3.Chain
    Add lubricating oil after a month of working

   Why not watch the operation video?